Double Glazing Locks Repair
When a double glazing window doesn't close, it creates drafts and allows valuable heat to escape. This also weakens the security of your home and puts you at a greater chance of being burglarized.
Over double glazing repairs , double glazed window hinges as well as seals, handles and handles may be damaged. If this happens, it could affect the way your windows function and invalidate any warranty you have.
Locks with a problem
Many people install anti-burglar devices on their main gates and doors however, they forget that windows are also the most frequent targets for burglars. A poor lock could cause drafts to enter the home, allowing valuable heat to escape, and weaken the security of your home.
If you find that your uPVC windows locks do not work, it is likely that the lock mechanism is jammed. This is usually due to a split in the gearbox component. This could cause the handle to not open, but to rotate 360 degrees. This issue is common with uPVC windows, but it can also happen in tilt-and-turn windows as well as sliding sash window.
If this happens it is possible to release the lock by applying pressure on the lever handle. This can help to unblock the gear box and allow the window's opening. If this does nothing, you may have to replace the entire mechanism for locking windows.
Most modern uPVC windows use espagnolette locks. These are a locking system inside the window that secures the window by utilising mushroom-like locking cams which are inserted into frame. The handle is the trigger for the gearbox, which activates the cams for either upward or down movement. A common fault with these is when the spindle on the lock is damaged which causes the handle to rotate freely, but not allowing the window to move open or close.
A malfunctioning transmission may make your window appear locked but it's not. This can occur when the rods in the centre, also referred to as crocodile tooth fixings, within the gearbox break off. Misty Glaze will supply and install replacement rods in the event that this happens.
It is important not to force a broken lock or stuck one. This can cause a lock to break or snap, especially if you have a uPVC windows that expands and contracts with temperature changes. It is best to contact a professional locksmith who can identify the issue and fix it.
Sticky Doors/Window
The problem of windows and doors sticking is an extremely annoying problem but they can also indicate more serious structural problems. It's important to get professional help if you have difficulties opening or closing the door or window. The issue could be the result of a variety of things such as foundation settlement and weak crawl space support.
Doors and windows often get stuck due to humidity or the frame itself. If your frames are wood, for instance, they could warp when exposed to humidity. Even if the hardware looks great, this could make it difficult to open and close your frames. If this happens the wood expands and presses against the hinges, causing friction.
Rub the door or window with soap to lessen friction, especially if it is stuck in the summer. This will make it less swollen and may resolve the problem temporarily. This method may need to be repeated regularly during times of high moisture.
A more permanent solution involves making the door or window frame down to a smooth finish. This can be done by hand or using a power tool. A professional can also sand and paint, or stain your door or frame to make it look brand new and fresh.
If Sanding and soap aren't working it's likely the issue is due to foundation settlement or a damaged crawl space. Examine for cracks in your area. It's time for you to consult an expert in foundations if you see any of these signs. Foundation damage can lead to uneven floors and a misaligned interior wall, which in turn causes stuck doors and windows. It is crucial to address these issues as early as possible to avoid more costly and dangerous repairs in the future. If not addressed the issues could get worse to the point that your entire house is structurally unstable. Call the Southeast's top foundation repair specialists to schedule an inspection today!
Cracking/Blowing Issues
When double glazing starts to deteriorate, it may cause cracks to form. This can be unsightly and it also allows all the heat that has been stored in your home to escape. This can also pose danger to your family, as the sharp glass pieces could cause injuries when they break. It is recommended to fix double-glazing windows with cracks before they get any worse. This will increase the cost of replacement.
Window seals are crucial to stop drafts from entering your home and keep air in between the window panes. However, as time passes, these can become perished or shrink due to weather changes. If not taken care of, it could lead to moisture, condensation and draughts inside your home.
A professional is usually able to resolve this issue. They can replace the window seal and get your windows back to their original condition. They will also suggest options to reduce the chance of future stress cracks, like trickle ventilation to improve ventilation.
You could also try lubricating the hinges and handles on your doors and windows. This will help them move more smoothly and will allow the lock to work as intended. Put some lubricating oils on a clean cloth and rub it into the hinges and handle mechanism, as well as the areas that they pass through the frame (for example, for sash windows). You can also remove the handles and clean them in warm soapy water to wash away any dirt or dust.
It is important to contact an expert when you find that your uPVC doors and windows are not working as they should. They can determine the issue quickly and resolve the issue in a short period of time. It's a lot less expensive and more secure than trying to do it yourself and potentially damaging the mechanisms. You'll also have peace of mind knowing your home is secure and safe.